Ruger Birdshead 45acp - Ruger Forum

Ruger Forum

Ruger Birdshead 45acp

This is a discussion on Ruger Birdshead 45acp within the Range Reports forums, part of the Firearm Forum category; Finally able to shake out new blued Ruger Birdshead SA today, (m5154). That was a bunch of FUN! This is a great little gun all ...


Go Back   Ruger Forum > Firearm Forum > Range Reports

Reply
 
LinkBack Thread Tools Display Modes

Old August 23rd, 2019, 10:14 AM   #1
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
Ruger Birdshead 45acp

Finally able to shake out new blued Ruger Birdshead SA today, (m5154). That was a bunch of FUN!

This is a great little gun all around, surprised how recoil is so very light in a 45. Did not shoot for accuracy as just wanted to get a feel for function & handling etc., while shooting off-hand.

Dead center & solid primer strikes. Action worked great, just using older factory Winchester 230g ammo that wanted to cycle out of inventory.

This ammo generally shot low at 10 yards but will begin getting to know fixed sight revolver and finding what it likes and will eventually handload for it. Will experiment more with different factory rounds too.

I love revolvers!



SA45 is offline  
Advertisements
Old August 23rd, 2019, 04:45 PM   #2
Moderator
 
Waveform's Avatar
 
Join Date: Jul 2012
Location: Arizona
Posts: 11,366
Waveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud of
Congratulations on a fun shooter. My first birdshead was the stainless version of the same gun and it triggered a strong interest in the birdsheads that persists to this day. The 45ACP birdie is one of the most fun to shoot of them all.

Waveform is offline  
Old August 23rd, 2019, 05:14 PM   #3
 
krunchnik's Avatar
 
Join Date: May 2010
Location: Lakeland,TN
Posts: 273
krunchnik is on a distinguished road
I sure like mine also-I have had good luck with my sights shooting high for all the different loads I tried-so I took a little off the top of the front sight-that did it.


krunchnik is offline  
 
Old August 23rd, 2019, 07:15 PM   #4
 
Join Date: Jun 2011
Location: wayne nj
Posts: 29,323
bwinters is a splendid one to beholdbwinters is a splendid one to beholdbwinters is a splendid one to beholdbwinters is a splendid one to beholdbwinters is a splendid one to beholdbwinters is a splendid one to beholdbwinters is a splendid one to behold
Beware birds head grip single actions are very addictive. I even own one in a colt clone though I had the dual notched base pin put in.
bwinters is offline  
Old August 23rd, 2019, 09:46 PM   #5
 
ngashooter's Avatar
 
Join Date: Jun 2015
Location: Dawsonville Georgia
Posts: 3,768
ngashooter is a jewel in the roughngashooter is a jewel in the roughngashooter is a jewel in the rough
My birdshead came to camp with me tonight. I plan to test some .45 Colt copper hollow point ammo in it tomorrow. Hoping that the weather cooperates.
Attached Images
File Type: jpg 20161016_101623_1566621919804.jpg (1.59 MB, 33 views)
ngashooter is offline  
Old August 24th, 2019, 04:37 PM   #6
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
Beautiful six-guns guys!, thanks for sharing and input. Yes, they are highly appealing, in so many ways.

Am a little concerned about how much I like them. Oh boy. Have a 44 stainless and already thinking of other calibers. Yet will spend alot of time with these 2.

I suspect lighter bullets will be a natural match for this existing sight 'as is' and this is most certainly fine by me.
SA45 is offline  
Old August 24th, 2019, 05:07 PM   #7
Moderator
 
Waveform's Avatar
 
Join Date: Jul 2012
Location: Arizona
Posts: 11,366
Waveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud of
I fell hard for the birdsheads and for a while started to collect as many as I found - 45ACP, 45 Colt in stainless and blue, 45 Colt heavy frame in stainless and blue, 357 stainless and the 44 Mag stainless. Yikes! Then I started my own variations and I'm still at it. I liked them all but found the 44 Mag just a little unpleasant for my tastes. Woulda been fine with 44 Specials I'm sure. In the end I decided I liked my own Frankenrugers the best and now I just have the ones I put together. Kinda wish I'd kept that 45ACP at times. That was a lot of fun to shoot along with a 1911. If Ruger ever did a convertible birdshead in 45 I'd have to get one.
Waveform is offline  
Old August 24th, 2019, 05:53 PM   #8
 
ifithitu's Avatar
 
Join Date: May 2016
Location: Derby City,Ky.
Posts: 8,872
ifithitu has a spectacular aura aboutifithitu has a spectacular aura aboutifithitu has a spectacular aura about
Those are some very nice looking Birdheads revolvers members,congrats to you all.
ifithitu is offline  
Old August 25th, 2019, 03:11 PM   #9
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
Thanks! Am falling for them, can already see that. Sleek handling, strong, well engineered and gorgeous little revolvers.

On 44, was thinking low-end loads for sure, considering nice size of grip frame. Yet for me, mostly shooting original 45 cal type ballistics l.

Was reading Iowagan's great post on adjusting fixed sights, if any of mine need filing have no problem with doing that. With filing or not filing, am already looking for 'nicely done' ideas of contrasting front sight from rear sight?. For an easier sight picture once settled on load(s).

One idea might be a very small brass bead, but would like to entertain less invasive measures as well or just refinishing may be fine depending on eye sight.

Also, another advantage of falling for pretty birdys, is that its perhaps possible to find different favorite loads for each 😉 gun. Even more fun. Will have to go where they take me.

Finally, enjoy a variety of durable finishes, blue & ss of course, yet not opposed to different hardened-industrial bead blast colors and even color case as well.

Pretty obvious, have been thinking about them. But am not really a machinist when it comes to the custom work have been admiring.
SA45 is offline  
Old August 25th, 2019, 08:20 PM   #10
Moderator
 
Waveform's Avatar
 
Join Date: Jul 2012
Location: Arizona
Posts: 11,366
Waveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud of
What I've found helps for sight contrast but avoids the easy nail-polish-on-the-front-sight trick is to serrate the rear of the front sight using a 50 point checkering file (Brownells). You may need to give the rear of the front sight an angle first (kinda looks like a shark fin) and some of the newer birdsheads have this already (44 Mag?)

This front sight was done by Gary Reeder so I can't take credit. I think it's pretty sexy.



I did the shark fin shape and serrated the back edge on this Single Six.



This is actually a Blackhawk front sight but the same applies.



The shiny front sight blade on a shiny birdshead is hard for my eyes. Not much better than black on black. The serration breaks up the shine and makes it a little easier. In the end though I have to admit I see adjustable sights better. But I refuse to give up my fixed sight single actions and I just accept I may not shoot them as well. Still a lot of fun.
Waveform is offline  
Old August 26th, 2019, 01:25 PM   #11
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
On 44 stainless, yes it came with fin shaped, serrated front site unlike the paired blue 45acp. Will have fun with'em and thanks! Looks like some welding with your target site when still in the white, cool. I dont mind FS either, a good challenge. Would prob get 1 AS if ever available, but MAY not be quite as sexy. Ruger doing a wonderful job with these.

20190826_140803_1566850682054.jpg
SA45 is offline  
Old August 27th, 2019, 03:10 PM   #12
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
ps: WAVEFORM, ....put my foot in mouth re: Adj Sight, Ha! Just saw your 3 Birds on Sticky.... wonderful custom work on your Nest! In fact, I just turned a shade of green Can see a bit of detail in each gun, great work.
SA45 is offline  
Old August 27th, 2019, 07:03 PM   #13
Moderator
 
Waveform's Avatar
 
Join Date: Jul 2012
Location: Arizona
Posts: 11,366
Waveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud ofWaveform has much to be proud of
Quote:
Originally Posted by SA45 View Post
ps: WAVEFORM, ....put my foot in mouth re: Adj Sight, Ha! Just saw your 3 Birds on Sticky.... wonderful custom work on your Nest! In fact, I just turned a shade of green Can see a bit of detail in each gun, great work.
Thanks SA45. They're addictive buggers and I have a lot of fun tinkering on them. I like to have one project bubbling on a back burner and it's usually a birdshead of some type.
Waveform is offline  
Old August 28th, 2019, 09:26 AM   #14
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
... can really appreciate that WAVEFORM. Also found slideshow fabricating from other guns exactly the way you want guns customized - and as SANDOG did w/ 45s. Lots of extra enjoyment in that. I love tinkering in this way, besides custom loads in between projects. Have enjoyed a few projects, but birds are different.
SA45 is offline  
Old November 18th, 2019, 09:38 AM   #15
 
SA45's Avatar
 
Join Date: Jun 2019
Posts: 367
SA45 is on a distinguished road
As we are getting closer to winter project time plus on downhill slide of primary hunting seasons, have these plus a few other handloading & grip projects on frontburner.

Yet have been thinking mostly about these Birdsheads(attached). The trigger and hammer actions are perfect for me already but will clean up any burrs. Will measure throats and forcing cones first to see if any attention there is needed.

But will look at customizing ideas to consider after that. Am open to ideas and how to, etc. Can't wait and plan on shooting them alot, the Birdsheads definitely have my primary focus....

20190828_121916_1574098551879.jpg
SA45 is offline  
Reply

  Ruger Forum > Firearm Forum > Range Reports

None


Search tags for this page
ruger birdshead
,

ruger birdshead vaquero

,
ruger vaquero review 45
,
will ruger make a 45 acp pc carbine
Click on a term to search for related topics.

Thread Tools
Display Modes


Top Gun Sites Top Sites List
Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
Copyright © 2006 - 2020 Ruger Forum. All rights reserved.
Ruger Forum is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.