f> Mini 14 issues - Ruger Forum

Ruger Forum

Mini 14 issues

This is a discussion on Mini 14 issues within the Ruger Semi-Auto forums, part of the Rifle & Shotgun Forum category; I recently (last week) bought a mini 14 prefix 195-96xxx Today I finally decided to tear it down, First thing, safety is bent and binds ...


Go Back   Ruger Forum > Rifle & Shotgun Forum > Ruger Semi-Auto

Reply
 
LinkBack Thread Tools Display Modes

Old April 19th, 2017, 12:53 PM   #1
 
Join Date: Apr 2017
Location: Texas
Posts: 7
akabaron is on a distinguished road
Mini 14 issues

I recently (last week) bought a mini 14 prefix 195-96xxx
Today I finally decided to tear it down, First thing, safety is bent and binds bad, would like to buy another safety tang. are they available aftermarket?
where to find one. Second has different screws in gas block, 3 same and 1 is
different and rounded out pretty bad, where can I get new screw to match the others? Can they be bought? The mini is stainless but if I have to I will use black parts. Other than that it looked like it hasn't been cleaned ever except for the bore. Took couple of hours of scrubbing to get in my acceptable clean.
Just need the safety and some gas block screws. Thanks



akabaron is offline  
Advertisements
Old April 19th, 2017, 02:44 PM   #2
 
Join Date: Dec 2016
Location: New Mexico
Posts: 8
Nutcat is on a distinguished road
You can try Numrich. I'd post a link for you but I don't have enough posts on this board yet. I just went to their website and they list both the safety and the gas block screws at reasonable prices. I've had good luck with them.
Nutcat is offline  
Old April 19th, 2017, 03:11 PM   #3
RJF
 
RJF's Avatar
 
Join Date: Jun 2015
Location: Spotsylvania, VA
Posts: 731
RJF is on a distinguished road
Here's Numrich (GunParts):
MINI-14. Accessories | Numrich Gun Parts
Gas block screws are item 20: both blued and stainless are in stock.
Safety is item 48: also both blued and stainless are in stock.

Hope this helps.
RJF is offline  
 
Old April 19th, 2017, 03:35 PM   #4
 
Join Date: Apr 2017
Location: Texas
Posts: 7
akabaron is on a distinguished road
Great, thanks for the help. just ordered them.
akabaron is offline  
Reply

  Ruger Forum > Rifle & Shotgun Forum > Ruger Semi-Auto

Thread Tools
Display Modes


Similar Ruger Forum Discussions
Thread Thread Starter Forum Replies Last Post
Mini-14 Ejection Issues Reets Ruger Semi-Auto 2 May 20th, 2016 04:04 AM
mini 30 issues??? 450marlin Gunsmithing 3 November 12th, 2014 12:55 PM
Ejector issues with new Mini 14 BrianK703 Ruger Semi-Auto 21 July 6th, 2014 04:41 PM
Mini 14 scope issues sparks25 Ruger Semi-Auto 8 July 14th, 2013 01:50 PM
MINI 14 and barrel issues Grim Ruger Semi-Auto 12 October 12th, 2011 06:59 PM

Top Gun Sites Top Sites List
Powered by vBulletin 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
Copyright © 2006 - 2017 Ruger Forum. All rights reserved.
Ruger Forum is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.