jkirby

I'm wanting to get rid of the mag disconnect saftey by changing the hammer bushing to a MKII hammer bushing from volquartsen. Do I have to change to a MKII hammer or can i do this and keep the MKIII hammer thats already in my gun . Thanks for the help

bearcatter

That's how I started out modding my Mark III. The III hammer will still work fine. Some people add a small thin washer to fill in the hammer's inset, but it's not necessary. If you use a washer, you have to be sure the notch on the bottom of the hammer is not obstructed.

Later I upgraded, and got the VQ Mark II accurizing kit with the stainless trigger. It includes a Mark II hammer.

The Mark III kit is only for someone wanting to keep the mag safety, which I can't imagine.

heymatthew

+1

I did the same thing, only I did the VQ internals and bushing all at the same time.

mishtub

I put a VQ trigger and sear in my Mk 3 added a Sam Lam hammer bushing ($10) to get rid of the mag disconnect & spring, lowered my trigger pull to 2lb 1 oz, with no excess overtravel. It took 11 days during the X-mas holiday for my letter to get to Sam and the bushing to return, great guy to deal with.
Sam's email:sg552.2@gmail.com

jimku

The absolute simplest way, and to do absolutely no other modifications except the bushing, is to use a Sam's bushing that is designed for the MKIII hammer.
Sam Lam
125 Searle Ave.
Toronto, ON
M3H 4B1
Canada
$11.00
Email sg552.2@gmail.com