MidLife

Been about a year, but, with a nice day out, took the SR9c out for a session. 50 rounds of Federal American Eagle 124gr FMJ

Nine inch paper plate at forty yards. ten of ten rounds hit the plate. 5 for 5 tries. (50 rounds total) Groups was not so great OH, but, getting 100% rounds on a nine inch plate for a whole box @ 40 yards for a "MidLife" guy is acceptable to me.
I dialed it in with a small screwdriver on the elevation of rear site. I had previously (last year) set the windage? (left right orientation) of the front site. This is my HD piece. I exercise it occasionally to keep current.

Really like this pistol. Am really thinking hard on a SR40c for 2013, buget allows. Would like a tad bit more punch in the same configuration. Will see what Santa thinks....

Kenny Lee

Don't care for the video, I've always used a brass or aluminmum drift and plastic or wood mallet.

A case hardend wrench and a claw hammer are the tools of carpenters and mechanics not gunsmiths.

I've had my SR9c for a few weeks and love it.

MidLife

Not a claw hammer. Sorry to offend.
Was a ball pein hammer.
A hardwood drift would be recommneded
Tough crowd.

vindyl

[QUOTE=Kenny Lee;745464]Don't care for the video, I've always used a brass or aluminmum drift and plastic or wood mallet.

A case hardend wrench and a claw hammer are the tools of carpenters and mechanics not gunsmiths.

Well we can't all be gunsmiths. It works and did not f the gun up any.

pipermac

I guess they dont use duct tape or staples for anything either.

MidLife

I did find it odd that Ruger has absolutely NOTHING in their manual that came with the firearm that references adjusting the front site.
Nothing, nada.
Strange indeed.
My site came from factory way, way off.
I was trying to draw attention to this. The front sight could have been designed better. I see this as a defect in that holsterring this firearm will, eventually, disloge the front site.

mndoggie

There is nothing wrong with the design of the front sight of the Ruger SR series. There are hundreds of other firearms using the same dovetail design.

On page 33 of both the original SR9c manual and also in the generic SR Series manual, Ruger says to make windage adjustment via the rear sight. The rear sight has a locking screw that maintains the adustment. It says the adjustment should be made with a wooden or plastic hammer.

The front sight on many firearms is moved only when adjustments can't be made in the rear.

Millions of dovetail style front sights aren't affected/dislodged by holstering.

MidLife

Guess mine is one in a million!

Actually, if you want to get technical, the front site design is in fact poor. A perpendicular sliding (in relation to bore axis) dovetail is NOT what you want to properly orient a non-adjustable site to the centerline of the bore. Guns that do use this design include a stop to prevent horizontal (side-to-side) movement. A sliding dovetail on the bore axis would retain the site more effectively, maintaining the relationship to the bore much more accurately IMHO.

Marshal Ruger

As soon as the SR9C came out I emailed the CEO about the possibility of having the SR40C and sure enough shortly afterwards it did come out, and I rushed to get mine. Definately like both guns for concealed carry. The one thing I did since my eye sight isn't as good anymore, I changed my front sights to a fiber optic green and this made a hugh difference for me. I can acquire the front sight so much better and feel more comfortable being able to HIT my targets!!!

Hopefully Santa will be nice to you this year so you can have "Twins" like mine.

mndoggie

So your front sight has been affected by holstering? I thought you said it was off from the factory.

How often do you need to readjust it after holstering?

MidLife

Yes, my front site was off from the factory. I posted a video in an attempt to help others that may have been affected by the issue of a front site that is "non-adjustable" and may be off center-line of the bore axis and cannot be corrected by the rear site travel.
Based on the responses in this thread, I am much more reluctant to share information I feel may benefit others in the Ruger community.
I have removed the video from this thread.

mndoggie

Removing your video is entirely your option.

If people want to view a video that provide front sight adjustment/replacement they can check here:



I took exception to your saying that the dovetail method of attaching "the front site design is in fact poor. A perpendicular sliding (in relation to bore axis) dovetail is NOT what you want to properly orient a non-adjustable site to the centerline of the bore"

Millions and million of fine firearms do use a dovetailed front sight. Many of the 1911 series firearms have been doing that for more than 100 years. Most are locked in only by the dovetail pressure (and in many cases loctite.) It is not a poor design. Maybe someone at Ruger didn't adjust your front sight correctly. Mine was centered and after almost two years of holstering and carrying it in a Kydex holster, I see absolutely no movement. Has yours moved since you adjusted it?

The front sight on the SR9c IS adjustable, it's just harder to do and the rear sight, with the lock screw as noted in the manual, would appear to be the method that Ruger prefers the end user to use.

The dovetail on many front sights is actually narrower on one side than the other (or the sight dovetail is wider on one side) and they should be inserted in one direction and removed in the reverse direction. That's common gunsmithing information.

People's concerns over the use of the tools you suggested using in your video were not unreasonable.

moakes58

There you go again mndoggie, taking what people say literally, like they really mean what they are posting. When will you learn!

mndoggie

You can't teach an old dog new tricks.

tarcher

My SR9c front sight was way off also and I tried to adjust it myself without any luck. So I took it to a local gunsmith. He told me that he has 'fixed' several SR series guns. seems that Ruger mills the 'dovetail' off center. He adjusted my sight then sighted it in to 25 yards using a bore laser. Will shoot it next weekend and see if it is better.