pistolpete

Hi there. I'm from up north in WI and I have several pistols including a Gp-100 and a new P95. I'm relativly new to guns and I have a problem with my new pistol that I could sure use some advice on. I just picked up a new p-95 today it has the decocker/saftey. The problem is with the folding ejector. When I insert a magazine loaded with snap caps and then rack the slide the slide locks open. The reason it locks open is the top round pushes the ejector off to the side and pins the ejector against the slide. The ejector is then jammed inbetween the slide and the top of the magazine causeing it to bind up. Any suggestions on what course of action to take. I don't know if maybe the ejector piece is the problem or how it is mounted in frame. I appreciate any comments.

BuckJM53

Welcome from SW Ohio and congrats on your new P95. Regarding your problem, the 1st question I have is if this problem is only experienced with the snap caps? If that's the case, I would drop the snap caps, as you will not hurt your P95 by dry firing without them. The included thread (see coffee pot's comments) has some useful info on the subject. http://www.rugerforum.com/phpBB/view...804ab8bdf657c0.