LEVERevolution/Bufflo Bore? Which levergun?

Single Six · 07-27-2010, 08:38 PM

Just got a 357 BH. Thinking to do some hunting with it. Coyotes, maybe deer, pigs.

How does the LEVERevolution compare to hot stuff like Bufflo Bore, etc.? Mostly looking for accuracy as the critters I'll be hunting won't be too big.

Also considering a levergun to go with it. Already have a Savage .223 Edge, great rifle, but leverguns....

Oh and tight budget on the levergun.

Thanks

volpert · 07-28-2010, 03:22 AM

lever evolution is not very hot ammo just a spitzer for tubes and revolvers. buffalo bore is about max for power and range and by far the better hunting ammo

razadp · 07-28-2010, 06:28 AM

It all depends on the range. At longer range past 100 yards, the better ballistics of the spitzer shape will be very noticeable.

At < 50 yards where most handguns are used, flat noses work better.

Its not really meant for handguns, its more for the lever actions.

45longcolt · 07-28-2010, 06:32 AM

I only measured 887 FPS from my 4" RedHawk with the LeverEvolution rounds. You may pick up another 100-150 FPS from yours but those rounds are NOT hot at all. These are mainly to just extend the rifle range so the rounds do not drop as much at a certain distance compared to a flat nose bullet. Now if you want some HOT rounds, try the Cor-bon 300 grain Hunter round, see my Avatar, that is one of them!

EDIT: That was the 45 Colt rounds. I have tried the .357 LeverEvolution and they gave me 1271 FPS from a 4" 686. Still, not a MAX speed especially for a 140 grain bullet.

Single Six · 07-28-2010, 07:44 PM

...but the LEVERevs are pretty darn accurate, right?

May I get input on a lever action to get?

Thanks

gqucool · 07-28-2010, 08:14 PM

Single Six I have a Marlin CB Rifle in .357 magnum I think this is really one of the nicer lever actions in .357 magnum you can opt for the 1894 C in a carbine length and save some $$$ mine is the older Cwboy Rifle with the 24 inch hexogon barrel. Totally love the rifle. Another good one is the earlier Rossi Model 92's but get one without the stupid safiety on top of the reciever. The Model 94 Winchester is too long of a action for the .357 magnum yes they work but not too well, been there done that one!! One other gun to also mention very nice but also pricey is the Henry Big Boy rifles they seem to be very well made but kind of heavy! Hope this helps!!!

Tater · 07-29-2010, 05:51 AM

To me, there is only one: Marlin. Made in the USA and as good as they get.

bigweatherby · 07-30-2010, 04:52 AM

I would also look at the Marlin first but the Henrys are very nice.

I would go with Corbon or BB for hunting ammo from the revolver.

kiwihunter · 08-06-2010, 04:29 PM

MARLIN.....MARLIN ......MARLIN all the way.

newtmaker · 08-07-2010, 04:31 AM

Quote:

Originally Posted by gqucool

Single Six I have a Marlin CB Rifle in .357 magnum I think this is really one of the nicer lever actions in .357 magnum you can opt for the 1894 C in a carbine length and save some $$$ mine is the older Cwboy Rifle with the 24 inch hexogon barrel. Totally love the rifle. Another good one is the earlier Rossi Model 92's but get one without the stupid safiety on top of the reciever. The Model 94 Winchester is too long of a action for the .357 magnum yes they work but not too well, been there done that one!! One other gun to also mention very nice but also pricey is the Henry Big Boy rifles they seem to be very well made but kind of heavy! Hope this helps!!!

I just picked up a new Rossi 92 but haven't had the opportunity to shoot yet.
I am looking forward to working up some loads for this gun and have some questions.
Since the 357/38 cartridge is primarily a pistol round, how should I approach reloads for use in the rifle? I was thinking a slightly slower burning powder selection might make a difference, or will it be so subtle that I will not notice?
Any help will be much appreciated.

Walt

07-27-2010, 08:38 PM	#1
Single Six Joined: Mar 2010 From: USA Posts: 160	LEVERevolution/Bufflo Bore? Which levergun? Just got a 357 BH. Thinking to do some hunting with it. Coyotes, maybe deer, pigs. How does the LEVERevolution compare to hot stuff like Bufflo Bore, etc.? Mostly looking for accuracy as the critters I'll be hunting won't be too big. Also considering a levergun to go with it. Already have a Savage .223 Edge, great rifle, but leverguns.... Oh and tight budget on the levergun. Thanks

07-28-2010, 06:32 AM	#4
45longcolt Joined: Oct 2009 Posts: 148	I only measured 887 FPS from my 4" RedHawk with the LeverEvolution rounds. You may pick up another 100-150 FPS from yours but those rounds are NOT hot at all. These are mainly to just extend the rifle range so the rounds do not drop as much at a certain distance compared to a flat nose bullet. Now if you want some HOT rounds, try the Cor-bon 300 grain Hunter round, see my Avatar, that is one of them! EDIT: That was the 45 Colt rounds. I have tried the .357 LeverEvolution and they gave me 1271 FPS from a 4" 686. Still, not a MAX speed especially for a 140 grain bullet. Last edited by 45longcolt; 07-28-2010 at 06:35 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2010, 03:22 AM	#2
volpert Joined: Jun 2010 From: sherwood arkansas Posts: 84	lever evolution is not very hot ammo just a spitzer for tubes and revolvers. buffalo bore is about max for power and range and by far the better hunting ammo

07-28-2010, 06:28 AM	#3
razadp Joined: May 2008 From: northern New Jersey Posts: 376	It all depends on the range. At longer range past 100 yards, the better ballistics of the spitzer shape will be very noticeable. At < 50 yards where most handguns are used, flat noses work better. Its not really meant for handguns, its more for the lever actions.

07-28-2010, 07:44 PM	#5
Single Six Joined: Mar 2010 From: USA Posts: 160	...but the LEVERevs are pretty darn accurate, right? May I get input on a lever action to get? Thanks

07-28-2010, 08:14 PM	#6
gqucool Joined: Dec 2009 From: Utah Posts: 537	Single Six I have a Marlin CB Rifle in .357 magnum I think this is really one of the nicer lever actions in .357 magnum you can opt for the 1894 C in a carbine length and save some $$$ mine is the older Cwboy Rifle with the 24 inch hexogon barrel. Totally love the rifle. Another good one is the earlier Rossi Model 92's but get one without the stupid safiety on top of the reciever. The Model 94 Winchester is too long of a action for the .357 magnum yes they work but not too well, been there done that one!! One other gun to also mention very nice but also pricey is the Henry Big Boy rifles they seem to be very well made but kind of heavy! Hope this helps!!!

07-29-2010, 05:51 AM	#7
Tater Joined: Apr 2009 From: Florida Posts: 471	To me, there is only one: Marlin. Made in the USA and as good as they get.

07-30-2010, 04:52 AM	#8
bigweatherby Joined: Mar 2010 From: South-west Michigan Posts: 1,560	I would also look at the Marlin first but the Henrys are very nice. I would go with Corbon or BB for hunting ammo from the revolver.

08-06-2010, 04:29 PM	#9
kiwihunter Joined: Mar 2010 From: New Zealand Posts: 86	MARLIN.....MARLIN ......MARLIN all the way.