kurremkarm

So I took my sp-101 apart. Done it a couple times but this time I came up with an extra part. In addition the hammer doesn't go all the way back and the cylinder will not rotate.

My wife took my digital camera so I took a couple pics using my webcam.

Can someone name this part and tell me how to get it back in my gun?

Thanks.

Attached Images

sp101 part.jpg (9.2 KB, 21 views)

kurremkarm

Wait I figured it out. Hammer dog spring plunger. What a huge pita to put back in.

Spike12

Well, there's an old saying...

Take a VW or Rochester carb apart then put it back together enough times you'll eventually wind up with two of them. Maybe we should append SP101's??

kurremkarm

Seriously? I've worked on two carbs and I ended up taking them both in to the mechanic to be fixed.

So this is an improvement. I have zero intentions of attempting to "stone" this thing or do my own trigger job. I did order a 10 pound hammer spring and smooth the trigger edge with a dremel. I bet I post again when I screw up changing the spring-- soon as it gets here.

A man must know his limitations.

GP100man

But you are learnin !!!

Try using the shank of a drill bit for the pin , then afterwards slide1out while inserting the other!!

Makes it alot easier than trying to hold a part in alignment to insert a little slippery pin !!!!