Ruger Forum

10/22 CB ammo

This is a discussion on 10/22 CB ammo within the Ammo Dump forums, part of the Firearm Forum category; Hi i am new to this forum and just got my 10/22. I have a 10/22 it fires 22LR ammo. My question is can I ...


Go Back   Ruger Forum > Firearm Forum > Ammo Dump

Reply
 
LinkBack Thread Tools Display Modes

Old August 26th, 2012, 09:35 PM   #1
 
Join Date: Aug 2012
Location: escondido ca.
Posts: 1
wrwasem is on a distinguished road
10/22 CB ammo

Hi i am new to this forum and just got my 10/22. I have a 10/22 it fires 22LR
ammo. My question is can I use CCI CB shells in it. they are the same length
as 22 shorts. Will they chamber and will they eject alright. I am haveing poblems with coyotes and have houses close by so i need a low vol. shell
thanks
Bill



wrwasem is offline  
Advertisements
Old August 27th, 2012, 04:27 AM   #2
 
Join Date: Jun 2012
Location: Virginia
Posts: 422
gfw1985 is on a distinguished road
Never tried, but going to say no. Could possibly be chambered individually and would fire, but not enough oomph to cycle action. The action is designed for 22LR only.
gfw1985 is offline  
Old August 27th, 2012, 04:48 AM   #3
 
Tom in Arizona's Avatar
 
Join Date: Oct 2011
Location: Munds Park, AZ
Posts: 121
Tom in Arizona is on a distinguished road
Take care to verify impact for each round fired before firing the next. May work at first in rifles but as your bore becomes dirtier a bullet a bullet may not clear the barrel.
Tom in Arizona is online now  
Old August 27th, 2012, 04:55 AM   #4
 
Join Date: Nov 2008
Posts: 140
Scott Free is on a distinguished road
I know it's possible, but I wouldn't shoot a coyote with any .22, let alone one that is so underpowered.
Scott Free is offline  
Old August 27th, 2012, 05:29 AM   #5
ozo
 
ozo's Avatar
 
Join Date: Sep 2011
Location: Nashville TN
Posts: 144
ozo is on a distinguished road
You are asking for danger to knock on your door......

I see no reason the 'short' projectile won't clear the barrel.....
I shoot them in lever guns, but guns chambered for short,long,long rifle.
You will have to use them as a single shot only.
I still do not recommend it.
Nor would I use a 'short' on a coyote.......
unless you are a pristine shooter and can guarantee an ear/eye shot.
A .22lr round is more than capable if the shot is placed correctly......
but shooting anything around other housing can be dangerous.....
any of the .22's are dangerous for 4-5 thousand feet.
ozo is offline  
Old August 27th, 2012, 01:12 PM   #6
 
Smithy's Avatar
 
Join Date: Jun 2011
Location: Central Valley of California
Posts: 753
Smithy is on a distinguished road
I finally figured out what Remington has done. They use to sell CB's and CB Longs. They've scrapped that idea and only sell CB Long Rifle. So that round is exactly the size of your standard 22lr. Power wise you'll have a pull bolt action, but they should feed perfectly and work in the 10/22's magazine perfect as well. It is just priming compound so I'd heed the warning's of Tom. Unless you see dirt kick up, you may still have the bullet in your barrel. Here they are...
Remington CBee Ammo 22 Long Rifle 33 Grain Hollow Point Best of luck in your critter problem. Smithy.
Smithy is offline  
Old August 27th, 2012, 03:46 PM   #7
 
laidlerj's Avatar
 
Join Date: Jul 2012
Location: Oregon
Posts: 767
laidlerj is on a distinguished road
I used CB's to help my youngest son learn how to shoot - he was initially a bit nervous about recoil (saw too many movies where people are "blown away" by recoil, I guess). Unless I'm mistaken, CB's are powered by just the primer and don't have any powder.

Yes, the CB's will fire just fine in a 10/22, but they won't cycle the action. I saw a .22 short conversion kit in the Brownell's catalogue, but even that won't cycle with CB's.

As others have mentioned, be sure that the bullet clears the barrel before firing another round, although I didn't have any problem with that. Also, be aware that you'll have to re-zero your rifle, 'cuz the CB's will hit a LOT lower than .22 LR's.

I'm not sure that CB's will have enough power to kill a coyote, even if you can hit it. More likely, you won't hit it unless you're shooting at less than 25 yards, given how fast the bullet is dropping at that point.

Good luck and be careful!

Jim
laidlerj is offline  
Old August 27th, 2012, 10:24 PM   #8
 
Smithy's Avatar
 
Join Date: Jun 2011
Location: Central Valley of California
Posts: 753
Smithy is on a distinguished road
That was the big whoopie with the Remington rounds http://www.midwayusa.com/product/160...n-hollow-point With the lighter hollow point that expands at lower velocities, you have a better chance for critter damage than the normal CBee solids. Don't know about coyote, but certainly rabbit, gopher, and squirrel are in danger. Smithy.
Smithy is offline  
Old August 28th, 2012, 06:59 AM   #9
 
Join Date: Apr 2008
Location: Newport News VA
Posts: 137
NewportNewsMike is on a distinguished road

Awards Showcase

I have used CB's in a 10/22 to control squirrel population and invading grackles (trying to move into the attic through bad soffit vents) numerous times.

CCI makes (or used to make, not sure now) CB's that are CB Long (as opposed to CB Short). The CB Long still is just the primer charge like the CB Short but was in a longer (22 LR-sized, rather than 22 Short-sized) case. I chose the CB Long over the CB Short whenever I could find them for the simply reason that I figured the the longer case may feed better through 10/22 magazine. Note that neither variety of CB will cycle the action - you still have to do so manually, but using a loaded magazine makes reloading as simple as racking the slide back to eject fired case and load new round.

When I first used the CB's in my 10/22, I realized that they were not as quiet as when I had used them in my Marlin 39A lever gun. Finally figured out that, while CB's will not cycle the action, there is enough power to move the bolt back enough to let some "noise" out. All quieted down nicely as soon as I started reaching over with my "off hand" to hold bolt fully closed during firing.

I would consider CB's about as powerful as a good pellet gun - which means not real powerful. I think you are limited to squirrels, birds, and other small critters. Certainly not anything the size of a coyote.

I have seen several articles over the years that talked about why we have CB's in the first place. One use was indoor pest control - mice in barns, et cetera. The other was Parlor Shooting. Seems in the late 1890's and on up to the 1920's until the Depression Era, folks would gather in the parlor for a little indoor shooting. The sport was big in France and Belgium (even special parlor guns were made), and finally made to the shores of the US.
NewportNewsMike is offline  
Reply

  Ruger Forum > Firearm Forum > Ammo Dump



Search tags for this page

.22 cb

,

22 cb ammo

,
22 cb in a ruger?
,
are remington .22lr cb's long enough to cycle properly
,

can a .22 short cycle a ruger 10/22 ?

,

can cci cb longs be shot out of a 10/22?

,
can you shoot .22 shorts out of pre 1970's 10/22's ?
,
cb long cci 10/22
,

ruger 10 22 ammo conversion kit

,
ruger 10 22 can it shoot 22 long shells
,
what are 22lg cb used for
,
what would a 22 cb be used for

Thread Tools
Display Modes


Similar Ruger Forum Discussions
Thread Thread Starter Forum Replies Last Post
Guns & Ammo Magazine article on SR22...ammo report overlyunderme Ruger Rimfires 4 February 24th, 2013 06:39 PM
Steel cased ammo and ammo alike Brookelynngreen Ammo Dump 12 June 19th, 2012 09:56 PM
My two Ammo Dumps... USA Ammo and DoubleTap intercooler Ammo Dump 6 August 6th, 2011 07:10 AM
White Box .223 Ammo Made in Russia at Cabela's not Wolf Ammo! gqucool Ammo Dump 6 January 31st, 2010 01:21 PM

Top Gun Sites Top Sites List  
Powered by vBulletin 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
Copyright © 2006 - 2013 Ruger Forum. All rights reserved.
Ruger Forum is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.